Catana Catana 65

Base Price:  €1,649,400

Additional Specs, Equipment and Information:

Mast and Rigging

• LED Anchoring light
• Opening for main sails, genoa, solent and spinnaker halyards and topping lift Combo steaming light and deck light
• Main sail cares and track from Harken
• Lazy Jacks padeye
• Aluminium mast foot black anodised Double Windex at top of the mast

• Aluminium boom from Marechal white lacquered
• Reefing lines blocks from Harken
• Miscellaneous
• Aluminium Front beam white lacquered from Marechal Aluminium compression beam white lacquered from Marechal Facnor LS furler on the main stay Stainless steel Rod stay for the genoa
• 2 Monotoron stainless steel shrouds

• Dyneema Main sail Halyard Ø 14 mm 2 :1 on the back beam
• Dyneema Double main sail sheets Ø14 mm on the back beam
• Dyneema Genoa halyard Ø 14 mm at mast foot
• Dyneema genoa sheet Ø 16 mm in the cockpit
• Polyester genoa furler rop Ø 8 mm in the cockpit

• Dyneema luff reefing lines Ø 14 mm on the back beam
• Polyester tack reefing lines Ø 14 mm on the back beam
• Dyneema topping lift Ø 12 mm on the back beam
• Polyester daggerboard rop Ø 12 mm in the cockpit

• 2 speeds Aluminium Winches self-tailing from Harken
• 2 Winches for genoa and spinnaker sheets, 80 Radial
• 2 aft beam 80 Radial Winches: with 1 electrical winch, dedicated for mainsail halyard and sheets, reefs and topping lift.
• 2 60 Radial Winches for daggerboard and furler rop
• 1 Winch on mast 50 Radial for front sails halyards
• Genoa
• 2 track from Harken
• 1 Antal track on the mast to trim the genoa halyard
• 1 Spinlock XAS 08/14 furler rop jammer in the cockpit
• Daggerboards
• 2 Harken blocks Ø 102 mm in the daggerboard hole
• 2 Spinlock XTS 08/14 in the cockpit
• Blocks box to send back the lines
• Stainless steel blocks boxes with Harken blocks Ø 127 mm

• Main Sail
• Double sheet tackle from Harken Ø 100 mm fix with snap shackle
• 4 Harken 648 Padeye for main sail sheets
• 2 Harken 629 Padeye for gybe preventer
• Back beam maneuvers
• 3 Spinlock ZS 12/14 for luff reefing lines
• 3 Spinlock ZS 12/14 for tack reefing lines
• 1 Spinlock ZS 12/14 for main sail halyard
• 2 Spinlock XCS 14/16 for main sail sheets
• 1 Spinlock XCS 14/16 for topping lift

• Mast foot
• Lofrans 2500 W windlass with wire remote control connected in the anchor locker and remote control at the starboard helm station
• 1 Delta 50 kg anchor with 80 m steel chain Ø 12 mm, link with Power Ball ¬
• 1 Nylon bridle Ø 24 mm with two eyes to fix it on the bow cleats

• Front beam
• Rotative Stainless steel anchor bed for main anchoring line
• Second fix stainless steel anchor bed for a second anchoring line

• Isothermal external roof curtains stopping 90% of sun’s rays
• Portlights and hatches for vent and light (depend of the layout)
• 2 Sails lockers hatches 561x561 mm with vent
• 4 Escape hatches 559x485 mm inside hulls
• 2 Hatches 511x381 mm on top of the roof
• 1 Hatch 511x381 mm on top of the starboard aft cabin
• 2 Portlights 649x192 mm in front of the roof
• 8 Portlights 649x192 mm outside hulls
• 1 Portlight 649x192 mm inside hull of the port aft cabin
• 6 Portlights 369x192 mm in the toilets

• GRP polyester /glass hatches
• 4 Cockpit hatches with teak
• 1 Cockpit seat hatch front of cockpit window
• 2 Fuel hatches at mast foot
• 2 Liferaft hatches at mast foot
• 1 anchor locker hatch at mast foot
• Sécurity
• Life line around the roof
• Hand rail and footrests made in solid teak
• High comfort Trampoline
• 2 Fore pulpits with not rot wood FSC seats with LED navigation lights
• Stainless steel aft handrails at top of the transom
• 10 Stainless steel stanchions 60 cm high
• Double stainless steel covered stranded Ø 4 mm
• 2 Side door 1.4 m wide
• 10 Aluminium cleats big size 450 mm

• Aluminium white lacquered sliding door/window, plexiglass
• 3 Ropes boxes in the aft beam with teak covers
• 1 Big locker in the cockpit sea
• 4 Big lockers under the cockpit
• GRP Glass cockpit table with Aluminium foot

• Storage in the cockpit seat backrest
• Soft Dralon Bimini toile with central plateform to manœuvre the boom included the cockpit lights
• 2 Aluminium white lacquered davits Spinlock jammers and lifting ropes for dinghy

• 2 GRP glass pulpits design CATANA
• 2 Glass GRP retractable helm station seats (stand and seat positions) with stainless steel handrail on top
• 2 Compass with compensation, light and protection cover

• 2 Stainless steel leather covered steering wheels with breakers
• 2 Balanced spade rudders built over stainless steel shaft and auto aligning bearings from JP3
• 1 Emergency tiller

• 6 mm strake teak with black seals
• 1 Stainless steel folding swimming ladder on port, GRP box and cover to integrate the swimming ladder
• Shower with cold and hot water on port
• 1 Stainless steel handrail on each side

• 2 GRP engine room hatches with stainless steel ram
• 1 Stainless steel acces for the emergency tiller
• 1 Gangway housing on each side

• Light and rigid panels made in sandwich foam
• Hulls floors in foam sandwich Wengé finish free maintenance
• Cabinetry and inner planking in natural satin varnished oak

• Brushed aluminium decoration stripes
• Isothermal Skaï covered ceilings

• Located forward platform and featuring a outside panoramic view
• Cockpit door frame with stainless steel logo CATANA (bottom)
• Cushions with high resistance foam and suedine covers
• Salon table with built in bar

• Wet suits locker with drain
• Hifi/TV area (able to fit 42’’ screen)
• Stainless steel handrails in each hulls steps
• Halogen lights with dimmer

• Numerous storage lockers
• Stainless steel sink (one and half sink) with resin top
• 160 L stainless steel refrigerator KOK Refrigeration system on hull exchanger

• Taps with ceramic seals for hot and cold fresh water
• Vitrogaz 4 burners stove and catalysed gas oven
• Halogen lights with dimmer

• Removable writing pad with laptop storage under
• Free seat with built in storages, could be use for the salon
• Large electronic free areas

• Electric pannel
• Reading light