Dolphin 460 - “CATABELLE ”

Dolphin 460 - “CATABELLE ”

I sold Catabelle new and she was fully optioned out and has been lightly used ever since. Her owner has kept the boat to immaculately cared for and upgraded and is the most equipped Dolphin currently on the market. The boat is a complete turn-key, live-aboard Dolphin performance catamaran that is ready to sail anywhere in the world on a moments notice. Please examine her extensive inventory, low engine and generator hours, and her photos. She's the real deal - one of those rare Bristol yachts one seldom sees.

We built 24 of these Dolphin cats in Brazil from 2003 until 2008. The rising Brazilian currency and weak dollar forced us to raise the price of these cats during the recession so we halted production. Several Dolphins have sailed all over the world, a few have circumnavigated, and to date there has not been a single structural failure - not a single delamination, cracked or bulging bulkhead, mast base compression, etc. Each of these fine yachts took over 20,000 labor hours to build and the interior fit and finish are far superior to what you find on French production cats. Her large daggerboards enable her to point very high into the wind without side-slipping. In every respect she is one of the finest performance live aboard cats ever designed and built. To learn more about Wonderland, please just give us a call.

Share |
LOA: 46'
TYPE: Dolphin
MODEL: 460
YEAR: 2006
USD: $619,000
LYING: Sarasota, Florida
Download the entire photo gallery in high resolution format.  (Size: 1.7 MB)
Managing Broker
Phillip Berman
215-508-2704

Additional Specs, Equipment and Information

Additional Specs, Equipment and Information:


Boat Name
Catabelle

Specs
Builder: Dolphin
Designer: Philippe Pouvreau

Dimensions
LOA: 46 ft 0 in
Beam: 24 ft 11 in
LWL: 45 ft 4 in
Bridge Clearance: 65 ft 6 in

Engines 
Engine 1:
Engine Brand: Twin 40HP Volvo engines sail drive
Engine/Fuel Type: Diesel
Engine Hours: 150

Engine 2:
Engine Brand: Twin 40HP Volvo engines sail drive
Engine/Fuel Type: Diesel
Engine Hours: 150

Tanks
Holding Tanks: (64 Gallons)


2010 - 2013 MODIFICATIONS
  • Fresh bottom paint - June 2014
  • Stripped all old paint from hulls
  • Removed and replaced all basket through hull fittings with Forespar flush mount valves.
  • Removed Garmin wedge transducer
  • Long board and re-fair hull
  • Resealed both centerboard trunks
  • Rebuilt both rudders and centerboards
  • Apply 4 coats of epoxy barrier coat, last one is grey for monitoring anti-fouling
  • Apply 6 coats of Vivid white anti-fouling
  • Replaced all plumbing inside both hulls
  • Replaced all fuel lines and moved Racor fuel polisher to anchor locker
  • Replaced all standing rigging with synthetic system from Colligo, reduced mast weight by 450 lbs
  • Replaced forestay with 12mm 1*19 ss and SWAGE fitting
  • Installed Harken MKIV roller furler for jib allowing jib to be reefed
  • Added custom toggle at top of forestay to allow for duel movement due to the rotating mast.
  • New Ulman Carbon main and jib; boat can now sail up wind at 9kts in about 14 kts of breeze
  • New Facnor 7500 roller furler for screecher; continuous line can be used for spinnakers if desired
  • UK screecher 1200 sq ft
  • UK a-spin reacher air-x 600  1600 sq ft
  • UK a-spin runner air-x 700    2265 sq ft
  • All halyards replaced with Amstel blue
  • Main halyard: 4:1 custom head block
  • Jib Halyard:  2:1  Antel turning eye
  • Screecher: 2:1 k-block on swivel
  • Spin Halyard: 1:1 Tylite Shackle
  • Topping lift: 1:1 Tylite shackle
  • Dyna-dux life line
  • All halyards can be lead back to the power winch when needed
  • New anti- fouling in 2011 switched to eco-paint by boat yard
  • New anti-fouling in Jan 2013 by the crew using eco-paint, polished out to a smooth finish.
  • Added a new Garmin 5200 touch screen in the nav station
  • Motors and generator serviced every 6 months
  • Relocated Scuba tank compressor under mast in a clean salt free environment, fill tanks on tramp in front of mast.
  • New water heater -  2012
  • New water maker board 
  • Lots of new parts to the Tack Tic system
  • New internal, no drag, high powered transducer for Garmin -  2013
  • New battery isolating system -  2013
  • New hydraulic bleeding system for steering 2012, takes 10 minutes to flush the whole system
  • New memory foam for all bunks -  2013
 

DIMENSIONS & DETAILS
  • LOA:  13.90m (45' 9")
  • LWI:  13.90m (45' 4") 
  • Maximum Beam:  7.30m (24')
  • Displacement, empty: 10,000kg (22,046 lbs)
  • Draft, boards up: 1.10m (3'-7")
  • Draft, boards down: 2.30 m (7' 5")
  • Mast clearance: 20 m (65’ 6")
  • Mast length: 17.60 m (57' 7")
  • Main sail area: 72 m2/775 sq. ft.
  • Head sail:  45.1m2/455 sq. ft.
  • Asymmetrical spinnaker: 100 m2/1076 sq. ft.
  • Gennaker on bowsprit area: 100m2/1076 sq. ft.
  • Fresh water capacity: 450l/118 US GAL
  • Fuel capacity: 450l/118.9 US GAL
  • Black water capacity: 64 US GAL (2x32 US GAL)
  • Max Draft: 3' 7 // 7' 5"
  • Displacement: 22,046 lbs

 


ENGINES & CONTROLS
  • 3 blades folding Volvo props (pair) spare
  • Twin 40HP Volvo engines sail drive
  • Complete engine panels with rev counters and hour meters
  • Battery 60 A/h for each engine
  • 1 blower for each engine room
  • 2x fuel-filter/water-separator
  • 1x fuel tank fiberglass 450lts
  • 1x fuel deck filler
  • Sound protection in engine rooms
  • Enhanced engine control gauges and panel, automatic cont duty inline fuel pumps
  • 3 blade prop from Gori as main prop treated with prop speed
  • 2 blade Kiwi feathering props (spare blades)

TANKS
  • Fuel:  118.9
  • Fresh water:  118.9

GENERAL SPECIFICATIONS
  • 3 cabins
  • 2 heads
  • 2 hatches in the forward part of the salon and an additional two along the sides.  Both of these segments are built in Lexan.
  • Access to the salon may be closed off by a Lexan door whose jams and rails may be of aluminum or any other compatible alternative.
  • The salon setee is U-shaped and there are compartments under the couch and wooden details throughout the entire salon.
  • One dining table
  • One navigating desk equipped with electronics, switchboard and shelves.
  • Ceiling lamps
  • One kitchen with two stainless steel sinks, an oven, a two-burner stove with a deluxe grill
  • An ice cooler, several cabinets and shelves
  • A pair of stainless 316L davits
  • The ceiling is lined with 0.05 mm thick purpose woven imported fabric with details built in hardwood
  • A cockpit and command station with a stool, desk and a sink
  • The double rooms are fitted with a wardrobe, a cabinet, a lateral porthole, a deck hatch, 12v sockets, lamps, with the above described fabric lined ceilings and hardwood details
  • 3" memory foam on all bunks
  • The bathrooms are fitted with a cabinet, a shower, a sink and a side porthole.  

 


ON DECK
  • Pontoons, platform and deck:  Vacuum-bound fiberglass composite, polyester resin and PVC foam core (Divinicel).
  • This construction process adopts the vacuum-bag lamination system which successfully associates resistance with minimal amounts of material.  The end result is a lightweight and very resistant composite similar to the kind observed in high-performance racing cars.  The fibers contained in this composite run in a multitude of directions to properly meet the strain and tension the vessel experiences.
  • The structural bulkheads are projected and manufactured in PVC (Divinicel) with vacuum-bound bi-axial glass fiber.  The project includes two water-tight bulkheads in each pontoon.
  • The rudders are built in polyester-glass, vacuum-bound around a high density PVC (Divinicel) frame.
  • The rudder axels are made of 316L stainless steel
  • Mechanical nylon sleeves
  • PVC glass-polyester boards
  • Mast, boom and bow-beam are made of carbon
  • Finishing:  The external parts of the pontoons, the deck and cabin are coated with White Gelcoat with pyramidal no-skid in the horizontal segments.  The hull is decorated with stripes above the water-line and around the beams.
  • The part of the hull that is to remain submerged receives an epoxy resin to ward off osmosis
  • Application of anti-fouling paint
  • The interior of the compartments, pits and storage areas are coated with "gel"
  • Deck light off mast but on board
  • Rudder system fitted with quick disconnects
  • 2010 Carbon Square top full batten main
  • 2010 Carbon jib
  • 2011 Reacher with Facnor 7500 continuous line furler
  • 2011 A-spin reacher with ATN snuffer
  • 2011 A-spin 2265 sq. ft. runner with ATN snuffer, no davits replaced with custom platform

RUNNING RIGGING
  • Full service on saildrives and motors
  • 4:1 Dyneema main halyard
  • 1:1 Dyneema Spin halyard
  • 2:1 Dyneema reacher halyard
  • 2:1 Dyneema jib halyard
  • 1:1 Spinnaker and genoa polyester halyard
  • 2 polyester reefing and outhaul lines with stoppers
  • Genoa and main sheets in polyester
  • Davit polyester sheets

DECK FITTINGS & EQUIPMENT
  • 2X pulpits with fitted seats
  • 5 Antal stoppers for halyards
  • Antal sheaves
  • 2x winch handle + winch pockets
  • 8 aluminum deck cleats - 300mm
  • Lexan windows
  • 1x spacious locker under the mast
  • 2x Coach roof handrails
  • Running lights (BB, BE and stern) + steaming lights
  • Deck spotlight - mast fitting
  • Spacious cockpit locker under the seat and under the floor
  • Ice chest
  • Sink with cold water at the cockpit
  • Cockpit shower with cold water
  • Stainless steel davits for a tender with 300 pounds weight at the most
  • Laminated table at cockpit for 8 persons
  • 15kg Bruce type Anchor + 60 meters 8mm chain
  • Anchor bridle and hook
  • Swimming ladder
  • Soft and comfortable trampoline
  • Pilot seat for 2 persons with foam
  • Panel for instruments
  • 1x water deck filler
  • 1 water tank 450 lts
  • 2 Antal ST48 winches on the roof for genoa/spinnaker sheet
  • 2 Antal ST44 winches for daggerboards and furling spinnaker sheet
  • 2 Antal ST44 winches for main sail sheet
  • 1 Antal ST48 electric winch for halyard and reefing lines
  • Antal genoa car, blocks and tracks
  • 3 Antal stoppers for daggerboards and furling
  • 2 Antal stoppers for main sail sheet
  • 10 Goiot opening hatches:
  • 2x49.49 storage room port side + top of owner's bathroom
  • 4x44.31 - 2x rear cabin, roof + 2x top of the roof - saloon
  • 2x36.19 - Fwd cabin, internal side hull
  • 10 Goiot opening portlights:
  • 1x each head
  • 2x each rear cabin
  • 1x each fwd cabin
  • Goiot electric windlass 1000W, 12 V, 8mm with remote controls at mast and helm station

 

 


RUDDER & STEERING SYSTEM
  • Rudders and sail drives protected by skegs
  • Hydraulic steering system with an emergency tiller
  • Volvo props on board
  • Racor twin fuel polishing system

SALOON
  • High quality cushions
  • Wood table for 8 persons
  • Stratfill floor
  • Galley intergrated
  • Navigation desk
  • Panel from inverter
  • Electric panel
  • Minimal storage space
  • Aluminum sliding door with lexan windows
  • 10V outlet

 


GALLEY
  • 12V Isotherm Refrigerator
  • 120V Isotherm Freezer
  • Storage Center Below Fridge and Freezer
  • 4 burner cooker with oven
  • Hot and Cold water
  • Double stainless steel sink
  • Cabinets and drawers
  • 110V Outlet

ELECTRONICS
  • Garmin 4200 chart plotter outside
  • Garmin 5200 chart plotter inside
  • Raymarine electronics ST60 line with speed, depth and wind at helm station
  • VHF
  • SSB with rope antenna
  • Raymarine 6005 Autopilot
  • Plastimo compass
  • Stereo system from Clarion with best speakers and bass from Polyplanar and amp from Sony Marine
  • Cell phone amplifier good for >100 miles
  • WIFI Amplifier with 5 mile reach connected to wireless router for WIFI throughout

CABINS
  • Thick and good quality mattesses
  • 110V plugs (1 each cabin)
  • Cabinet

PLUMBING
  • Pressurized H&C water
  • 2 independent pressurized freshwater pumps (1 for cold and 1 for hot water, each one with its own pump and accumulator tank)
  • New water heater

ELECTRICITY
  • Master volt charger
  • Brand new Master volt house bank 1200 amp hours
  • Shore Inlet (110V/30AMP)
  • 110V outlet (1 in each cabin)
  • 2000 watts inverter and 100 A/H battery charger with remote panel
  • Battery isolator
  • 1300 A/H of battery capacity for house service Odyssey
  • Mastervolt Charger
  • Additional 110V outlets
  • LED Dimmers 12V in each salon
  • LED lights throughout
  • LED Masthead Light, All Around Light Port, Starboard

ADDITIONAL ADD-ONS

Sails by North Sails

  • Gennaker with UV suncover and foam luff
  • Spinnaker 1.5 oz, 130 sq meters + snuffer
  • Spinnaker 0,75 oz, 168 sq meters + snuffer
  • Spectra main sail 8.5 oz, 2 reef, 6 full batten, main sail cover
  • Extra Roach for main sail
  • Genoa Spectra 8.5 oz, rope luff, UV protection


Mast & Rigging

  • Carbon fiber, fixed wingmast, 17.60 m /( 57' 7 ), white painted
  • Carbon fiber, rotating wingmast, 17.60 m /( 57' 7 ), white painted
  • Carbon boom, shell format, white painted
  • Forebeam and Dolphin striker in white painted carbon
  • Carbon bowsprit
  • 1 Antal ST48 electric winch for halyard and reefing lines
  • 2 :1 Spectra main halyard
  • 1:1 spinnaker and genoa Spectra halyard
  • Reefing lines in spectra

Deck Fittings & Equipment

  • Deck washdown pump ( sea water )

Mooring

  • 30 Kg / ( 66 LBS) Anchor + 60 m / (196 FT) 10 mm chain
  • Second anchor Bruce type 15 Kg / ( 33 LBS )
  • 50 meters / ( 164 FT ) of anchor line 18mm
  • Fenders with line ( 23 cm diameter / 85 cm long ) each
  • Dockline 6x10 meters (19' 6 X 32' 8) – 16mm diameter

Cockpit

  • Bimini hard top
  • Cockpit shower with hot &cold water
  • Cockpit cushions
  • Carbon wheel
  • Sink with hot & cold water
  • Wooden Table for 8 persons
  • Cockpit seat stainless steel plus cushion

Engines

  • 3 blades folding Volvo props ( pair )
  • Extra fuel tank ( or water tank )

Electricity

  • 600 A/h of battery capacity for service only
  • Additional 110 V outlets
  • Dimmers 12 V in the salon ( each )

Electronics Ray Marine

  • Autopilot Remote 600R with LCD repeater

Saloon

  • Cushions with leather
  • Ice maker
  • Wire For Speakers
  • Fans ( each )

Galley

  • 12 V Waeco fridge front door opening
  • 12 V Waeco freezer front door opening
  • 4 burner stove + oven
  • Microwave

Cabins

  • 12V plugs ( each )
  • Set of integral fly screens and blinds on deck hatches

Heads

  • 110V Plugs for Razor and appliances in bathroom - 1000 Watts max.

General

  • Generator 8 Kva Kholer with sound shield, panel and remote panel
  • Air conditioning 5200 BTU’s for cabin with digital control ( each )
  • Tender 3 meters with rigid floor ARBOAT
  • 8HP outboard motor
  • Watermaker SPECTRA 63 Lts/hour - 16 Gal/H - 110 volts
  • Divinicell Floors and bulkheads

ADDITIONAL INCLUSIONS
  • 6 man life raft - 2012
  • Dinghy - 2009
  • 15 hp outboard on dingy
  • Garman radar and Tic Tac electronics
  • Weather station
  • Arimid rigging and Titanium fixture for mast (uninstalled)
  • Some question if a life raft is involved
  • All EPIRBS and safety equipment
  • Air compressor in port bow
  • Fighting chair for the new platform

Disclaimer: The Multihull Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Managing Broker

Phillip Berman

Office Phone: 215-508-2704
Cell Phone: 484-686-5363
Fax: 215-508-2706
Email:
SkypeSkype Me!
Ask a Question
First Name (Required)
Last Name (Required)
Email (Required)
Phone (Required)
Message
Testimonials From Satisfied Customers

"

These are stand up people, who make a stand up product. I would buy from them again in a heartbeat.

"

~ Jay Clark, Dolphin 460
"Sugar Shack"

"

I just wanted you to know that your level of service and the high degree of customer satisfaction have made owning my Dolphin a great experience.

"

~ Daniel Zlotnick, Dolphin
"Sugar Shack"

Want to Learn More?

Subscribe to Our Email Newsletter